Surface burners TWT/VMP (gas)

Surface burner VMP

The special design of the surface burner allows operation with and without combustion air fan. The concept developed in the modular system opens up a variety of possible applications.

  • Wide control range (up to 35:1)
  • Min. power: 6 kW
  • Temperature uniformity
  • Extremely good and clean combustion
  • Firing efficiency 100 %
  • The surface burner exceeds all standards of indoor air heating
  • Modular system with different basic elements
  • Unlimited power (up to 16,000 kW and more)
  • Burner construction made of high-quality, heat-resistant materials
  • Simple and static construction, no moving parts, almost maintenance-free

The requirements placed on modern industrial combustion systems are becoming more complex, including environmental protection standards, technological advances and, in particular, rising energy costs. The properties of the surface burner VMP are adapted to these.

Typical applications: Automotive, Chemical, Construction, Glass, Plastics, Printing, Papermaking, Food processing, Textile sector …

Low-temperature: Spray booth air supply systems, industrial heaters, dryers (textile, grain, malt, building materials ...)

Mean temperature: Spray dryers, all process fresh air heating systems up to 650 ° C, ovens, roasting ovens, thermoformers, continuous dryers

Forced-air burner TWT

Due to the large and stepless power control range of up to 60:1 and the short and extremely stable flame, the burner is suitable for all tasks in the field of direct heating of industrial process air.

  • Wide control range (up to 60:1)
  • Min. - capacity: 6 kW
  • Burner power standard up to 1.200 kW
  • Higher power on demand
  • Short and very stable flame
  • Firing efficiency of 100%
  • Very clear and maintainable burner design
  • SCan be used in the combustion chamber with both negative pressure and back pressure
  • Transverse flow up to approx. 25 m / sec. possible (Assambly in process air duct)
  • Significantly below the values for CO and NOx emissions limited in TA-air

The requirements placed on modern industrial combustion systems are becoming more complex, including environmental protection standards, technological advances and, in particular, rising energy costs. The properties of the surface burner VMP are adapted to these.

Typical applications: Automotive, Chemical, Construction, Glass, Plastics, Printing, Papermaking, Food processing, Textile sector …

Low-temperature: Spray booth air supply systems, industrial heaters, dryers (textile, grain, malt, building materials ...)

Mean temperature: Spray dryers, all process fresh air heating systems up to 650 ° C, ovens, roasting ovens, thermoformers, continuous dryers